Format: Proximity Wiegand 125khz 26 bit EM-RFID format

Colour: White

Supplied: Pack of 10

Size: 54h x 85w x 1.8d mm

Read distance profiles:
Wristband @ 25mm
Blue key fobs @ 35mm
Blue-Red/white key fobs @ 35mm
Thick (Lanyard) 1.80mm cards @ 55mm
Thin (Printable) 0.8mmm cards @ 60mm

All of our products and any other Proximity Wiegand 125khz 26 bit EM-RFID format
Please check with your current supplier as to the exact format you have in the first instance

Are the cards numbered sequentially?
No they are not

Can the cards be printed on?
No, the thick 1.8mm proximity cards could be difficult to print upon as they have a textured finish

What are the numbers printed on the fobs & cards?
The EM chip inside each fob or proximity access card is pre-programmed with a Hexadecimal number that provides an 18 digit number during the manufacturing process. The first 10 digit number is the Unique I.D number (U.I.D) and is printed on the fob

The second 8 digit number is the Wiegand code number (Not printed on fobs), However, both 10 & 8 digit numbers are printed on the proximity access cards

Are these numbers important?
Yes, some 26 bit Wiegand card readers will only 'read' the 10 digit U.I.D number in a binary format, some will only 'read' the 8 digit Wiegand number

Some fob readers that require a remote control in order to delete lost or missing fobs or cards might not accept you manually entering the 10 digit U.I.D number but will only accept the manual entering of the 8 digit Wiegand number

A lot of PC access control systems will only display and accept the 8 digit Wiegand number, such as our PC access control system AC8001 or AC8002. It is ultimately down to the particular system or format used and/or required

How would I obtain the 8 digit Wiegand number?
The easy way is with our Proximity USB desktop card reader, a simple 'plug and play' unit that you plug in to your computer, open up Windows Note Pad, present a card or fob and the 8 digit Wiegand number is displayed

Do your key fob readers require a Proximity USB desktop card reader if I use key fobs or cards?
No, you would only require one if using key fobs with our PC access control system AC8001 or AC8002, or of course if you have several hundred cards/fobs to program as it will speed up programming them individually

What item do they work best with - card reader or keypad/card reader?
They will work perfectly with any of our items or any Proximity Wiegand 125khz 26 bit EM-RFID format. Please check with your current supplier as to the exact format you have in the first instance